Fabulous Tips About How To Check Pinion Angle

Whatever angle that is, that is what the pinion angle is.

How to check pinion angle. From what i recall pinion angle should always be measured under the complete vehicle weight i.e. Using an angle finder place it on the underside of the driveshaft and record the angle indicated from the driver's side of the vehicle. Whats wrong with the car that you think the pinion angle is messed up?

Simply use a magnetic angle finder on the pinion and the driveshaft. Joined feb 25, 2003 · 3,318 posts. Begin by measuring the angle of the driveshaft and writing it down.

Move the angle gage over and measure the angle of the pinion itself. To check the pinion angle, the vehicle needs to be sitting with its weight on the tires, as it would be normally. The actual pinion shaft is inside the rear end housing, so you have to take the measurement on the pinion.

At that time, if you have a girdle diff cover with a flat spot on the back, check that angle and see if it is the same or if it is. We can consider thata worm with lead angle γ is almost the same. #9 · jan 13, 2010.

To determine the current pinion angle, your angle finder should point to the yoke coming from the rear end and add from the yoke and driveshaft angle. Setting the pinion angle is the final step in driveline alignment. You need to actually measure it first.

Next, place the angle finder under the flat. Pinion and driveshaft angles are critical to ensure your car does not have any unwanted vibration, and you get maximum life from your driveshaft. This illustration from jerry bickel shows an easy way to check pinion angle: